105AF Tac-Kote

Karnak #105 Tac-Kote is a cold applied asphalt cut-back designed specifically as a primer/adhesive for use under asphalt based roadways.











ADVANTAGES


Karnak #105 Tac-Kote penetrates capillaries to bind and seal dusty surfaces to provide the correct base for subsequent toppings.

SPECIFICATIONS


  • ASTM D-2028 RC-250
  • AASHTO M-81

SURFACE PREPARATION


Surfaces to be treated with Karnak #105 Tac-Kote should be oil and moisture free in order to assure proper penetration.

APPLICATION


Karnak #105 Tac-Kote is easily applied by brush, squeegee or spray. Apply at the rate of 1 to 1 1/2 gallons per 100 sq. ft.. Actual rate may vary due to the nature of the substrate.

COVERAGE


Apply at the rate of 1 to 1 1/2 gallons per 100 sq. ft..

CAUTION


Do not use near open flame. Avoid breathing solvent fumes and prolonged contact with skin. Do not take internally. If swallowed, do not induce vomiting. Call a physician immediately. Keep out of reach of children. Keep container covered when not in use. Do not thin. Dispose of in an environmentally safe manner.

CARE OF TOOLS


Spray equipment, brushes and other tools may be cleaned, and the dried asphalt film removed with mineral spirits.

PACKAGING


Available in 5 gallon pails and 55 gallon drums.

Translate Site

Kanopy Reflective Roof Maintenance Solutions
  • Reduce Energy Use
  • Lowers Peak Energy Use, reducing energy costs year-round
  • Helps the environment, reduces "Heat Island Effect"
  • Extend the life of the roof
  • Reduces waste. Helps avoid roof tear-off.
  • Economic compared to roof replacement
  • Eliminates interior building operation disruption