Karnak #160.1 Amphibicaulk if a carefully prepared caulking-grade roof cement with special water displacing characteristics, which ensures an effective bond to both wet and dry surfaces. The ability to adhere during inclement weather conditions makes Karnak #160.1 Amphibicaulk the first choice of both roofing contractors and plant engineers. Karnak #160.1 Amphibicaulk is composed of selected asphalt, mineral fillers combined with refined solvent, and special chemical ingredients, which give it a unique water displacement quality.
Karnak #160.1 Amphibicaulk is a cold process, heavy bodied, caulk-grade roof cement ideal for sealing leaks in and around asphalt built-up roofs, joints chimney cracks, skylights, vents, down-spouts and gutters. The dried film retains its flexibility and ductility, so the caulking will resist extreme variations in temperature and weather. Karnak #160.1 Amphibicaulk may also be used to improve wind resistance on low slop shingle roofs.
- ASTM D-4586 Type I
- Fed. Spec. SS-C-153 Type I
All surfaces should be clean and free from oil, grease, rust, dirt and other foreign matter. Excess water should be removed, if possible, before application of Karnak #160.1 Amphibicaulk.
Karnak #160.1 Amphibicaulk is ready to use directly from the container. No heating is required. Apply Karnak #160.1 Amphibicaulk directly over the cracks with a caulking gun.
Application rate of a ¼” x ¼” bead of caulk will yield approximately 25 lineal feet per 10 oz. caulking cartridge. Coverage rate may vary depending on desired thickness and surface being caulked.
Do not use near open flame. Avoid breathing solvent fumes and prolonged contact with skin. Do not take internally. If swallowed, do not induce vomiting. Call a physician immediately. Keep out of reach of children. Keep container closed when not in use. Do not thin. Dispose of in an environmentally safe manner.
Available in 10 oz. caulking cartridges.