The Karnak products listed below, are certified to be manufactured to meet and/or exceed said ASTM and/or Federal Specification(s). For specific product ASTM#s and FED. SPEC#s see
| Karnak #16AF Double Coverage Cement |
Lap cement, Rolled roofing adhesive, Blind nail cement. |
2 to 3 gallons |
| Karnak #19 & #19AF Flashing Cement |
General purpose Roof Repair and Flashing cement. |
Approx. 8 gallons Average thickness of 1/8 |
| Karnak #66AF Modified Bitumen Adhesive |
Brush or trowel grade SBS Membrane Adhesive |
1 gallon. 2 gal. porous for irregular surfaces |
| Karnak #71AF Fibered Roof Coating |
General purpose fibered roof coating |
4 gallons |
| Karnak #78AF Cold Process Cement |
Multi-purpose Asphalt Adhesive. Used w/ Karnak's cold process roofing system |
2 gallons* |
| Karnak #81AF Modified Bitumen Adhesive |
Brush or trowel grade, SBS Membrane Adhesive (Spec. grade) |
1 gallon. 2 gal. porous on irregular surfaces |
| Karnak #97 & #97AF Fibered Alum. Rfg. Ctg. |
Fibered Reflective Aluminum Roof |
1 to 1 1/2 gallons |
| Karnak #100 AF Non-Fibered Emulsion |
General All Purpose Non-Fibered Roof Coating. |
2 to 3 gallons |
| Karnak #100 AF Non-Fibered Primer |
Prepares Non-Combustible surfaces for Torch Applied Mod. Bit. Membrane |
1 to 2 gallons |
| Karnak #155 & #155AF Amphibikote (wet/dry) |
Emergency Flashing cement for Wet or Dry surfaces. |
Approx. 8 gallons Average thickness of 1/8" |
| Karnak #168AF Tar Roof Resaturant |
Heavy Duty Non- Protective Roof Resaturant (use w/gravel topping) |
7 to 8 gallons (Gravel in at 400 lbs./100 sq.ft.) |
| Karnak #169AF Non-Fibered Alum. Ctg. |
Non-Fibrered Reflective Aluminum Roof Coating. |
1/2 to 1 gallon |
| Karnak #220AF Fibered Emulsion Roof Ctg. |
General Purpose Fibered Roof Coating |
4 gallons |
| Karnak #229AF AR-Elastomeric |
Elastomeric Ctg. Used Where Nominal or Slight Movement is Anticipated |
2 to 4 gallons |
| .Karnak #505 Elasto Brite M Metal Roof Coating System |
Highly Elastomeric Coating for Metal Roofs U.L. Approved. (Colors available) |
1 gallon (Base) 1 gallon (Finish) |
| Karnak #83AF Fibered Dampproofing |
Dampproofing for below Grade Surfaces
(brush / spray grade) |
4 gallons |
| Karnak #86AF Fibered Trowel Mastic |
Dampproofing for below Grade Surfaces
(trowel grade) |
5 to 6 gallons |
| Karnak #100AF Non-Fibered Emulsion Damp. |
Protective coating for Exterior & Interior Surfaces. membrane system - vertical surfaces |
2 to 3 gallons |
| Karnak #100AF Non-Fibered Primer |
Prepares Non-Combustible surfaces
for Torch Applied Mod. Bit. Membrane 2 gallons / #31 mat.
/ 2 gallons |
2 to 4 gallons |
| Karnak #108AF Asphalt Primer |
General Utility Primer for Brick,
Concrete Metal & Gypsum Surfaces |
1 to 1 1/2 gallons |
| Karnak #220AF Fibered Emulsion
Damp. |
Protective coating for Exterior &
Interior Surfaces (brush grade). Can be used as an adhesive
for styrofoam insulation |
4 to 6 gallons membrane system -
vertical surfaces 3 gallons / #31 mat. / 3 gallons |
| Karnak #920AF Fibered Emulsion
Mastic |
Protective coating for Exterior &
Interior Surfaces(trowel grade). Can be used as an adhesive
for styrofoam insulation |
5 to 6 gallons membrane system -
vertical 3 gallons / #31 mat. / 3 gallons |
| Karnak #229AFAR Elastomeric Waterproofing |
Asphalt base
Elastomeric Waterproofing |
4 to 6 gallons |
| Karnak #192 One-Kote
Liquid Applied Waterproofing Membrane |
Polyurethane Elastomeric Membrane
Waterproofing |
4 gallons |