Contact Homepage
Company
Products
Energy Star Products
Project Profiles
FAQs
MSDS
Specification & Codes
Partners & Links
Sign-up
Technical Bulletins
Educational Services
 


DESCRIPTION
Karnak #79AF Wood Block Mastic is prepared from carefully selected asphalts, solvents and mineral fillers. These components are mechanically mixed thoroughly and passed through a high speed homogenizer ensuring a smooth, trowel consistency product free from foreign matter and lumps.

 
 

USESKarnak #79AF Wood Block Mastic is a highly adhesive asphalt cement expressly designed for mastic use in cold application of wood block flooring.

APPLICATIONThe temperature of karnak #79AF Wood Block Mastic when applied should be above 70°F. If necessary, Karnak #79AF Wood Block Mastic may be warmed by storing containers in a heated room prior to application. Concrete floors must be dry, sound, level, clean and at least 30 days old, with a good wood float finish or equal. Grease, oil stains and dust must be removed, and high spots levelled. Low areas should be filled with concrete patching mix. Let dry thoroughly after cleaning or patching. Dusty or very porous surfaces should be primed with Karnak #108 Asphalt Primer at the rate of 1/2 to 1 gallon per 100 sq. ft.. Karnak #108 Asphalt Primer must be fully cured, (dry to the touch), before application of Karnak #79AF Wood Block Mastic.

COVERAGEKarnak #79AF Wood Block Mastic should be applied directly from the container. Spread at the rate of 1 gallon per 40 to 50 sq. ft. using a 1/4 inch serrated mastic trowel with a sawtooth pattern. Apply the Karnak #79 Wood Block Mastic only at recommended rates of coverage. An inadequate amount will result in poor bonding, while an excessive amount may cause bleeding of the mastic between the blocks.

Karnak #79AF Wood Block Mastic must be allowed to dry a minimum of at least 2 to 3 hours or until the surface is dry to the touch. Installation of the wood blocks to the Karnak #79AF Wood Block Matic may be safely delayed up to 24 hours if desired. Drying is hastened if adequate ventilation is provided. Do not apply blocks to wet or excessive Karnak #79AF Wood Block Mastic .

Application instructions of the wood block manufacturer take precedence and should be followed in close detail to ensure a satisfactory application.

CARE OF TOOLSTools and other equipment should be thoroughly cleaned with mineral spirits, taking necessary precautions when handling combustible materials.

CAUTIONDo not use near open flame. Avoid breathing solvent fumes and prolonged contact with skin. Do not take internally. If swallowed, do not induce vomiting. Call a physician immediately. Keep out of reach of children. Keep container covered when not use. Do not thin. Dispose of in an environmentally safe manner.

PACKAGINGAvailable in 5 gallon pails.

Home
MSDS
Search
FAQs
Company Info
Email Us
Contact
 
Search
Roof Products
Reflective Coatings
Asphalt Roof Coatings
Adhesives
Re-Saturants
Primers
Repair Mastics
Restoration & Reroofing
Dampproofing
Waterproofing
Fabrics & Repair Tapes
Caulking, Sealants & Flooring
Other Products
© 2003, Karnak Corporation.