D-4586 Type I Class I & Class II

D-3409

SS-C-153 Type I (AF)

VOC Content: 250 g/L MAX

155 Amphibikote is a cold process, heavy bodied, trowel applied emergency roof cement ideal for repairing leaks in asphalt built-up roofs, flashing on walls, chimneys, skylights and vents, down-spouts and gutters. The dried film retains its flexibility and ductility so the coating will resist extreme variations in temperature and weather.

Weight per Gallon: 8.87 lbs.
Solids by Weight: 77% Nominal
Solids by Volume: 70% Nominal
Color: Black
Application Temp.: 40°F to 120°F
Service Temp(Cured Film): 15°F to 180°F

SURFACE PREPARATION:
Although it can be applied underwater for emergencies, it is best if all surfaces are clean, dry and free from oil, grease, dust, dirt, loose paint or foreign matter.

APPLICATION:
155 Amphibikote is ready to use directly from the container. No heating is required. Spread 155 Amphibikote by trowel to an average thickness of 1/8” (8 gals. per square per coat) or greater to all surfaces to be treated. To repair large cracks or breaks, spread 155 Amphibikote over the damaged area, then embed 34 Asphalt Saturated Cotton Fabric, 31 Fiberglass Membrane or 5540 Resat-Mat polyester reinforcement and re-apply another coat of 155 Amphibikote over the entire patch.

Do not use near open flame. Avoid breathing solvent fumes and prolonged contact with skin. Do not take internally. If swallowed, do not induce vomiting. Call a physician immediately. Keep out of reach of children. Store in a heated room and keep container covered when not in use. Do not thin. Dispose of in an environmentally safe manner. Cover air intakes during application and while drying. Exterior use only.

CARE OF TOOLS:
Trowels and other equipment should be thoroughly cleaned with mineral spirits or petroleum solvents, taking necessary precautions when handling combustible materials.