ASTM D-2028 RC-250

AASHTO M-81

VOC Content: 230 g/L MAX

KARNAK 105 Tac-Kote is specifically used as a primer/adhesive for use under asphalt based roadways.The product penetrates capillaries to bind and seal dusty surfaces to provide the correct base for subsequent toppings.

Weight per Gallon: 7.56 lbs.
Solids by Weight: 75% Nominal
Solids by Volume: 71% Nominal
Color: Black
Application Temp.: 40°F to 120°F
Dry Time: 8 to 24 hours

SURFACE PREPARATION:
Surfaces to be treated with 105 Tac-Kote should be oil and moisture free in order to assure proper penetration.

APPLICATION:
105 Tac-Kote is easily applied by brush, squeegee or spray. Apply at the rate of 1 to 1.5 gallons per 100 sq. ft. Actual rate may vary due to the nature
of the substrate.

COVERAGE:
Apply at the rate of 1 to 1.5 gallons per 100 sq. ft.

Do not use near open flame. Avoid breathing solvent fumes and prolonged contact with skin. Do not take internally. If swallowed, do not induce vomiting. Call a physician immediately. Keep out of reach of children. Store in a heated room and keep container covered when not in use. Do not thin. Dispose of in an environmentally safe manner. Exterior use only.

CARE OF TOOLS:
Spray equipment, brushes and other tools may be cleaned, and the dried asphalt film removed with mineral spirits.