VOC Content: 430 g/L MAX
Federal Spec: TT-C-494
Federal Spec: FF-H-C-494
Military Spec: Mil-C-16173D

118 Black Asphaltum has wide use as a general-purpose black asphalt coating on all surfaces. It provides excellent protection for aluminum window frames and other metals when placed in contact with masonry walls. It will also help prevent corrosion and decay on storage tanks, railings, pipe and exterior duct work.

Weight per Gallon: 7.34 lbs.
Solids by Weight: 52% Nominal
Solids by Volume: 46% Nominal
Color: Black
Application Temp.: 40°F to 120°F
Dry Time: 8 to 24 hours
Service Temp (Cured Film): -40°F to 180°F

SURFACE PREPARATION:
All surfaces should be clean, dry and free from oil, grease, dust, dirt, loose paint or other foreign matter.

APPLICATION:
Apply 118 Black Asphaltum by brush or spray equipment. Masonry and dried out built-up roof structures should be liberally coated to obtain the most penetration. Recommended application temperature is 40°F to 120°F. If applying at temperatures lower than 40°F, the substrate must be free of moisture and/or ice crystals.

COVERAGE RATE:
Apply at the rate of 1 to 1.5 gallon per 100 sq. ft. depending upon the condition and porosity of the surface to be primed.

Do not use near open flame. Avoid breathing solvent fumes and prolonged contact with skin. Do not take internally. If swallowed, do not induce vomiting. Call a physician immediately. Keep out of reach of children. Store in a heated room and keep container covered when not in use. Do not thin. Dispose of in an environmentally safe manner. Cover air intakes during application and while drying. Exterior use only.