VOC: 245 g/L Max

‍

Designed especially as an adhesive for paving blocks and pressed asphalt bricks, eliminating the need for a hot kettle.

237-2% Neo-Asphalt can be applied to either concrete or macadam (blacktop) using a brush or squeegee. For best results, allow a minimum of 2-3 hours open airtime or until material becomes tacky and just skins over prior to
embedding the paving blocks.

COVERAGE:
Apply at the rate of 1.5 – 2 gallon per 100 sq. ft. Do not exceed coverage rate.

Viscosity @ 25C: 12,000-18,000 C.P.S.
Specific Gravity @ 25C: 1.02
Weight per Gallon @ 25C: 8.1 lbs.
% Solids by Weight: 70%
Softening Point of Rubber Blend: 150F
% Inorganic Material: 6.5%
% Long Fiber: 10%
% Neoprene: 2% min.

SURFACE PREPARATION:
All surfaces should be clean, dry, free from oil, grease or other foreign matter.

APPLICATION:‍

237-2% Neo-Asphalt can be applied to either concrete or macadam (blacktop) using a brush or squeegee. For best results, allow a minimum of 2-3 hours open airtime or until material becomes tacky and just skins over prior to embedding the paving blocks.

COVERAGE:
Apply at the rate of 1.5 – 2 gallon per 100 sq. ft. Do not exceed coverage rate.

NOTE:
237-2% Neo-Asphalt should be thoroughly mechanically mixed prior to application. Macadam (blacktop) surfaces should be cured prior to applying 237-2% Neo-Asphalt.

Do not use near open flame. Avoid breathing solvent fumes and prolonged contact with skin. Do not take internally. If swallowed, do not induce vomiting. Call a physician immediately. Keep out of reach of children. Keep container covered when not in use. Do not thin. Dispose of in an environmentally safe manner.

CARE OF TOOLS:
Tools and other equipment should be thoroughly cleaned with mineral spirits, taking necessary precautions when handling combustible materials.